3.5 or 4 inch for xj

Great prices on parts!
717-739-8029

Moderator: Board of Directors

Post Reply
deerejeep
Web Wheeler
Web Wheeler
Posts: 77
Joined: Wed May 12, 2010 8:07 pm

3.5 or 4 inch for xj

Post by deerejeep » Sun Apr 24, 2011 11:13 am

Thought i would ask you first . what does a lift kit cost? thank you.

User avatar
jimmy21669
Trail Rated
Trail Rated
Posts: 322
Joined: Sun Feb 27, 2011 5:56 pm
Location: Hagerstown, MD
Contact:

Re: 3.5 or 4 inch for xj

Post by jimmy21669 » Sun Apr 24, 2011 12:54 pm

If you want 3.5....I can help you build it without a kit if you are interested.

Otherwise expect from $500-$1000 depending on options.
1998 2 DR XJ....Work in progress.....
Going offroading and being mad about scratches is like visiting a house of ill repute and being mad about the shot of penicillin.
http://www.facebook.com/garrettfab

User avatar
karlvin08
Crotchety Old Bastard
Crotchety Old Bastard
Posts: 2251
Joined: Thu Sep 16, 2004 10:35 pm
Location: Clarksville, TN
Contact:

Re: 3.5 or 4 inch for xj

Post by karlvin08 » Sun Apr 24, 2011 1:19 pm

jimmy21669 wrote:If you want 3.5....I can help you build it without a kit if you are interested.

Otherwise expect from $500-$1000 depending on options.

Or maybe let the vendor whose section this is in have a chance to see it before you offer your guru wisdom.
Overgunned? Hell, that's better than the alternative.
A big hole lets a lot of air in, and a lot of blood out.
E. Kieth

Reading is Fundamental

My 3 Favorite words..."Your prescriptions ready"
NavinRJohnson wrote:Sorry, but you guys are clueless. Any hair left on the badger interferes with the process, because the bits of the watermelon get caught in the hair. It's a sticky phucking mess. You don't really want to have to deal with that while looking for the quarter.

User avatar
jimmy21669
Trail Rated
Trail Rated
Posts: 322
Joined: Sun Feb 27, 2011 5:56 pm
Location: Hagerstown, MD
Contact:

Re: 3.5 or 4 inch for xj

Post by jimmy21669 » Sun Apr 24, 2011 1:24 pm

karlvin08 wrote:
jimmy21669 wrote:If you want 3.5....I can help you build it without a kit if you are interested.

Otherwise expect from $500-$1000 depending on options.

Or maybe let the vendor whose section this is in have a chance to see it before you offer your guru wisdom.

You are right...I was looking at new posts, not what section it was. Accept my apologies.
1998 2 DR XJ....Work in progress.....
Going offroading and being mad about scratches is like visiting a house of ill repute and being mad about the shot of penicillin.
http://www.facebook.com/garrettfab

User avatar
wrks6
The Board
The Board
Posts: 2049
Joined: Mon May 17, 2004 3:06 pm
Location: Pennsyltucky
Contact:

Re: 3.5 or 4 inch for xj

Post by wrks6 » Sun Apr 24, 2011 9:35 pm

There's a pretty good price range depending on your needs. A basic 3" kit starts as low as $242 and they can go over $1,300. Two big differences are if you want add-a-leaf or full replacement rear leaf springs (recommended) and if you want control arms (none, lower, or upper and lower).

Thanks!

Eric
kNOw Where 2Jeep
717-739-8029
www.knowwhere2jeep.com

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest