HELP!!! MC2100 Question

Forum for all things CJ

Moderator: Board of Directors

Post Reply
NobudgetCJ
Web Wheeler
Web Wheeler
Posts: 26
Joined: Mon Feb 19, 2007 12:43 pm
Location: Thurmont
Contact:

HELP!!! MC2100 Question

Post by NobudgetCJ » Tue Apr 20, 2010 6:33 pm

Ok so I have been messing with this Carb way to long. It is finally on and vacuum lines are in place. However I do not have a fuel inlet fitting on this carb. The question is... What size and where do I get one ASAP? Is it 1/8male to 5/16 barb. The one of my Carter is to large. NAPA has no idea what I need so I am SOL until I can get some answers. Thanks.
1979 CJ7 currently under construction!

User avatar
cmecha
Active Member
Active Member
Posts: 1042
Joined: Tue Nov 07, 2006 10:18 am
Location: fredrick
Contact:

Re: HELP!!! MC2100 Question

Post by cmecha » Wed Apr 21, 2010 11:22 am

i would pull the Carb and take it with you to autozone. or ask for a fuel inlet fitting for a '74 F-100 pickup with a 302
/l ,[____],
l---L -0lllllll0-
()_) ()_)--O-)_)

1984 jeep CJ donated to jeepless jeeper

2006 silver TJ, slowly but surely

NobudgetCJ
Web Wheeler
Web Wheeler
Posts: 26
Joined: Mon Feb 19, 2007 12:43 pm
Location: Thurmont
Contact:

Re: HELP!!! MC2100 Question

Post by NobudgetCJ » Fri Apr 23, 2010 8:41 am

Awesome thank you. Went to autozone website typed it in and they had one in stock over on monocacy. Got her hooked up. Thanks Again
1979 CJ7 currently under construction!

User avatar
cmecha
Active Member
Active Member
Posts: 1042
Joined: Tue Nov 07, 2006 10:18 am
Location: fredrick
Contact:

Re: HELP!!! MC2100 Question

Post by cmecha » Fri Apr 23, 2010 12:53 pm

no problem.
/l ,[____],
l---L -0lllllll0-
()_) ()_)--O-)_)

1984 jeep CJ donated to jeepless jeeper

2006 silver TJ, slowly but surely

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest